Bitumen Emulsion SS2

Bitumen Emulsion SS2

We are instrumental in offering a wide range of SS 2 Cationic Bitumen Emulsion that is mainly used for road construction. This chemical is processed using supreme class chemicals and latest technology by keeping in mind industry standard. In order to deliver flawless to our clients, our offered chemical is tested on various predefined standards of the industry. The entire range is available in different packaging options at highly competitive prices.

Features :

Good penetration into miniature pores of sub bases
Easy spray
Extended breaking
Penetrate the cracks & crevices and impart strength to the layers
Low temperature curing
High adhesive properties
Bonds well to cool, damp substrates/surfaces
Prevents permeability of atmospheric air to the bottom layer
Binds loose aggregates together strongly
Prevents lateral movement of structural layers
Prevents raveling and rutting
Water resistant and enhances easy drainage of water

Application :

Prime Coat : Application of RATNAMANI SS-2 to an absorptive surface, designed to penetrate, bond and stabilize this existing surface and to promote adhesion between it and the construction course that follows. Recommended rate of application is 6 to 9 kg per 10 sq. m.

Fog Seal / Crack Seal : Light application of RATNAMANI SS-2 to an existing pavement as a seal to inhibit raveling, or to seal the surface, or both. Also used to fill and seal small cracks in existing pavements. Fog seal helps to rejuvenate an old oxidized road surface, thus extending its life. Recommended rate of application is 5 to 10 kg per 10 sq. m.

Slurry Seal : It is a surface treatment for structurally sound roads where the wearing course has deteriorated. Slurry seals are mixtures of fine aggregate, Portland cement filler, bitumen emulsions and additional water. When freshly mixed, they have thick consistency & can be sprayed to a thickness of 1.5 – 5 mm. They may be used to seal cracks, arrest fretting and fill voids and minor depressions. Recommended rate of application is 10 to 12 kg per 10 sq. m.

Premix Seal Coat : Premix is a mixture of fine aggregate, Portland cement filler, bitumen emulsions and additional water. They may be used to seal wide cracks, fill voids and minor depressions. Recommended rate of application is 10 to 12 kg per 10 sq. m.