Bitumen Emulsion RS1
Bitumen Emulsion RS1 is recommended for Tack Coat treatment and the application rates as per MoRTH are as below :
| Application | Quantity in kg / 10sqm area |
|---|---|
| Normal bituminous surfaces | 2.0 to 2.5 |
| Dry and hungry bituminous surfaces | 2.5 to 3.0 |
| Granular surfaces treated with primer | 2.5 to 3.0 |
| Non- bituminous surfaces | |
| Granular base (not primed) | 3.5 to 4.0 |
| Granular base (not primed) | 3.0 to 3.5 |
Bitumen Emulsion RS2
Bitumen Emulsion RS2 is recommended for Surface Dressing treatment and the application rate as per MoRTH is as below :
| Application | Quantity in kg / 10sqm area |
|---|---|
| Two coat surface dressing | 28-32 |
Bitumen Emulsion MS
Bitumen Emulsion MS is recommended for Pre Mix Carpet and Patchwork. The application rate as per MoRTH is as below :
| Application | Quantity |
|---|---|
| Premix carpet | 20 -23 (kg / 10sqm area) |
| Pothole repair | 7% (weight of aggregate) |
Bitumen Emulsion SS1
Bitumen Emulsion SS1 is used for Prime Coat application and perform several important functions such as coating and bonding loose mineral particles on the surface of the base, hardening and toughening the surface of the base, waterproofing the surface of the base by plugging capillary or interconnected voids, and providing adhesion or bond between the base and the asphalt mixture. This grade of emulsion penetrate quite deep in WMM / WBM surface providing an effective Prime Coat.
| Application | Quantity in kg / 10 sqm Area |
|---|---|
| Prime coat | |
| Low porosity | 6 to 9 |
| Medium porosity | 9 to 12 |
| High porosity | 12 to 15 |
Bitumen Emulsion SS2
Bitumen Emulsion SS-2 is designed for use in slurry seals and for cold storable mixtures for patching. They are designed for soil stabilisation and also suitable for use with cold recycling. These emulsions are tailor made as per quality of aggregates and local site conditions.
| Application | Quantity in kg / 10 sqm Area |
|---|---|
| Slurry seal | 10 to 12 |
| Premix seal coat | 10 to 12 |
| Fog spray | 5-10 |